44MM review

warewulf · #**161** (**permalink**) 02-09-2008, 11:56 AM

Quote:

Originally Posted by jadillon

Min = 150 for those like us with previous orders/sets. 1.65 per.

Not too bad I guess -- About $250 for 150 chips.

DubleDex · #**162** (**permalink**) 02-11-2008, 02:51 PM

Quote:

Originally Posted by X-Files

Hope everyone can be patient.

So ... Very ... Challenging ...

Thanks for all your hard work! I'm getting closer to finalizing my inlay design (which I will put up in the mock-up section). So maybe the 44 Factory will be complete about the same time my inlays are, so I can have a look.

It's only the 11th, and I still feel like I'm coming down to the wire! Sheesh!

DubleDex · #**163** (**permalink**) 02-19-2008, 12:15 PM

Just placed my order. 300 44mm chips and 200 39mm chips.

Now, I somehow have to figure out how I'm going to wait a few months to actually get the chips. My head may explode.

EmptyPocs · #**164** (**permalink**) 02-19-2008, 12:35 PM

Quote:

Originally Posted by DubleDex

Just placed my order. 300 44mm chips and 200 39mm chips.

Now, I somehow have to figure out how I'm going to wait a few months to actually get the chips. My head may explode.

spend the time thinking up your next set

DubleDex · #**165** (**permalink**) 02-19-2008, 03:31 PM

Quote:

Originally Posted by EmptyPocs

spend the time thinking up your next set

Actually, I'll be spending that time saving up for the REST of this set! These are just my higher denoms (100, 500, 1000 and 5000). I want to complete the set with 5, 25 and NCV.

JM · #**166** (**permalink**) 03-02-2008, 11:36 PM

Are they here yet???

DubleDex · #**167** (**permalink**) 03-03-2008, 08:27 AM

Quote:

Originally Posted by JM

Are they here yet???

I haven't even gotten my proof yet! I'm sure Sandy is SWAMPED.

I'm trying not to even think about them to make the whole waiting thing go faster. Fat chance.

Matthew · #**168** (**permalink**) 03-07-2008, 09:01 PM

I updated the review with some comments about racks from Casino Discount Supply and Chipco racks for the 44m chips......

EmptyPocs · #**169** (**permalink**) 03-20-2008, 02:37 PM

I just spoke with PCOL regarding 44mm racks.
They do not as of yet have any.
The racks they tried turned out to be unacceptable.
The CDS racks are 43mm and leave a gap in the bottom.
However, 20 will fit per row and they racks will also stack (somewhat tightly) when full.
So they seem to be the only choice at the moment (other than the much tighter chipco racks mentioned) unless you are into making some wood racks.
LINK to my 43mm rack pics

EmptyPocs · #**170** (**permalink**) 07-18-2008, 03:15 PM

Quote:

Originally Posted by EmptyPocs

I just spoke with PCOL regarding 44mm racks.
They do not as of yet have any.
The racks they tried turned out to be unacceptable.
The CDS racks are 43mm and leave a gap in the bottom.
However, 20 will fit per row and they racks will also stack (somewhat tightly) when full.
So they seem to be the only choice at the moment (other than the much tighter chipco racks mentioned) unless you are into making some wood racks.
LINK to my 43mm rack pics

IMPORTANT UPDATE:

My 44mms were probably one of the 1st batch sent out by PCOL.
The 1st batch fit these racks snug and perfect onc shuffled a bit.

I have since received a 2nd order and the thickness of the chips is such that 20 will not fit the racks. 19 fit snug.

When I stack 20 of my original chips next to the new chips there is 1 chip extra in height. This includes the DG-Green chips which I ordered 2x .

I can only assume that something has changed in the production of these and if you must have 20 per row you are not going to get it.