Rincon Labels + Ripped sheets group buy

warewulf · #1 (**permalink**) 11-16-2005, 01:30 PM

Changed original post and title:

A few of us are going to order Labels and have them sent to Jason for printing. Please reply if you need some.

PocketRocket · #2 (**permalink**) 11-16-2005, 03:51 PM

See your posting in the General forum, I just posted Jason's e-mail there.
If you've got an image of that red tree on the inlay, the rest of it looks pretty easy. Shouldn't take very long to duplicate that one.

Quote:

Originally Posted by warewulf

Ok, I want to have Rincon labels made to match my $1 chips. Who do people recomend for getting labels done? Jason? Someone else?

Cog labels -- Are these also done by Jason? Any problems with these?

Someone may have mentioned getting Rincon labels done, but this could be my imagination??

Cin0s3 · #3 (**permalink**) 11-30-2005, 10:29 AM

I have the design, just not the labels. If you want to get the labels I would be more than happy to printem

warewulf · #4 (**permalink**) 11-30-2005, 12:03 PM

I contacted ripped sheets and they would only sent a min. 10 sheets of labels and I would only need 5-6 sheets. 10 sheets would be $57 which combined with the price of the blank chips would be very close to just getting chips done by asm.

If anyone is interested in buying 3-4 sheets, let me know. At least that would offset my cost a bit.

omar · #5 (**permalink**) 11-30-2005, 11:04 PM

Quote:

Originally Posted by warewulf

I contacted ripped sheets and they would only sent a min. 10 sheets of labels and I would only need 5-6 sheets. 10 sheets would be $57 which combined with the price of the blank chips would be very close to just getting chips done by asm.

If anyone is interested in buying 3-4 sheets, let me know. At least that would offset my cost a bit.

Well, I have just realized that I ordered way more chips then I did labels for a large tourney set. I am not sure what size/shape ripped sheets labels you are looking at, but I could use another 15 sheets of the 7/8", round labels. If this is what you were looking for, then perhaps we could get a quantity break at rippedsheets, i can't remember where the breaks were. I do know that we needed 100 sheets to get down to $3.02/sheet. I assume all sheets have to be the same label size/shape.

warewulf · #6 (**permalink**) 12-01-2005, 01:12 AM

Yeah, getting the 7/8" labels. Extreme517 is going to get in on it too.

We'll just figure out how many sheets everyone needs. I'm pretty sure I need
6-7 sheets.

extreme517 · #7 (**permalink**) 12-01-2005, 01:39 AM

Yeah, I'm definitely in on this. However, can we get the graphics tweaked a bit? The font on the denominations doesn't look quite right. Here's a link to some pictures of actual Rincon chips:

http://www.chipguide.com/cgi-bin/sea....cgi?id=cavcrc

I will want to purchase 50 cent labels, $5 labels and 25 cent labels...I'm assuming the "25" from the $25 label could be matched for the 25 cent labels.

CinOs3...would it be possible for you to tweak the labels a bit and get a better match? I'm happy to work out payment to get these printed up as authentically as possible. Thanks!

I'm looking at 1100+ labels in total, so however many sheets that works out to...

omar · #8 (**permalink**) 12-01-2005, 11:12 AM

Quote:

Originally Posted by extreme517

Yeah, I'm definitely in on this. However, can we get the graphics tweaked a bit? The font on the denominations doesn't look quite right. Here's a link to some pictures of actual Rincon chips:

http://www.chipguide.com/cgi-bin/sea....cgi?id=cavcrc

I will want to purchase 50 cent labels, $5 labels and 25 cent labels...I'm assuming the "25" from the $25 label could be matched for the 25 cent labels.

CinOs3...would it be possible for you to tweak the labels a bit and get a better match? I'm happy to work out payment to get these printed up as authentically as possible. Thanks!

I'm looking at 1100+ labels in total, so however many sheets that works out to...

With my 15, then we are up to 35-36 sheets. Extreme, your 1100 labels equal at least 14 sheets, depending on how your denoms break down. For what it is worth, I am interested in a differnt design that the Rincon, but that shouldn't matter to Jason. However, I do believe the "River Oaks Casino" font is a little too big, compared to the actual inlay. I am certrain that Jason can dial in what you all want. I am very intereested in seeing your ASM color combos for these labels. I would consider doing the same thing if ASM would more closelt match the edgespots of the originals.

extreme517 · #9 (**permalink**) 12-01-2005, 11:56 AM

omar,

I think you'll appreciate my color choices. My chips will be arriving in maybe another week, so I don't have actual pictures yet. The 25 cent chips will be solid gray, the 50 cent chips will be solid arc yellow (this is an exact match to the authentic Rincon 50 cent chips), and my $5 will use the same colors as the $5 Rincon chips with a different edge spot configuration...red base with pink 312 edgespots. I love the $1 Rincon chips and I think these other chips will complement them nicely!

warewulf · #10 (**permalink**) 12-01-2005, 12:00 PM

These are the colors I'm most likely going to get:

The gray will be .25 cent
Black = $5
Lavender = $10

Even though it looks like a cash set, I mostly host tourneys so it will be a T3000 set (just add two 0's).

Looking forward to getting this off the ground. I was going to order some custom ASM's with double edge spots, but they wouldn't let me order 300, and that's all I need.