[projectaero]

Hello.
I am putting in an order in the next 3 weeks for 500 desert sand chips and i have made up my mind that i am going to get this case, purely for the fact looks nice and no dice .... i dont need dice.


http://www.holdempokerchips.com/prod...p?prod=case550

Just a couple of questions to anyone who has seen it or has it:

1 - Since it only holds one deck of cards can it hold kem, copaq cards ?

2 - can the spacer between the extra 50 chip holder be taken out to use for a dealer button or secondary cards.

3 - Is there any compartments undernearth the lining

4 - If you put a dealer button in there with full set of chips cards etc will it do damage to the chips or be hard to close or forced down to close ?

Thanks heaps.
Project Aero

[BlindSquirrel]

1. Yes, one deck without a plastic case.

2. Maybe. The spacers are real wood and glued in very well. Removal would probable leave visible damage to the felt underneath.

3. No.

4. Nope. Plenty of height for a standard sized button on top of the cards.

[dad604]

I have two of those cases and they are nice and sturdy.

1. You can stack 2 decks, poker or bridge size.
2. Yes, but they are in pretty good.
3. Nope
4. Dealer button will fit on top of 2 decks.

Also each 50 rows will hold about 53/54 chips and the middle 25 rows will hold 30 chips of standard thickness (Paulson clay or pre V7 NJ ceramic.) Might not be true with the new V7 NJ's as reports are that they are thicker.

No problem in having rows full of chips, 2 decks of cards and dealer button fit in case or any extra miss blinds button, etc. that will fit on top of cards with dealer button.