 | 
02-13-2007, 01:29 PM
|  | Prick | | Join Date: Jul 2005 Location: Merrimack, NH
Posts: 6,312
Chips: 137
| | | Re: Best way to un-warp Paulson chips !!!
IF you don't want to risk damage to your chips you can also gouge out your eyes and chop off all your fingers. You'll have no issues with the slight wobble of tall stacks then...you'll have other issues to deal with.
__________________
People Suck
|
02-15-2007, 10:33 PM
| | Short Stack | | Join Date: Jan 2007
Posts: 20
Chips: 24
| | | Re: Best way to un-warp Paulson chips !!!
Where can I get ceramic blanks for the fix?
Thanks!
JC |
02-17-2007, 07:11 AM
|  | ChipTalk.net Sponsor! | | Join Date: Jul 2005 Location: Gothenburg, Sweden Age: 32
Posts: 1,891
Chips: 1,577
| | | Re: Best way to un-warp Paulson chips !!!
Quote: |
Originally Posted by TheCaver Where can I get ceramic blanks for the fix?
Thanks!
JC |
I could certanly offer this to those interested but I've been avoiding it as I'm afraid people will think that I posted this in an attempt to sell blanks, which of course is not the case! I think the best thing to do is to ask one of the ceramic chip vendors in the US if they would be willing to sell you some. They allready have alot of blanks in stock and it would be cheaper to ship within the US. Also, there might be other things you can use in between the clay chips. But whatever you use needs to be round, 39mm in diameter, perfectly flat, uncolored and be able to withstand the heat. Perhaps there are other poker chips on the market that would work too, but I have to advice people to be very careful when testing other things to use in between. You don't want to ruin your expensive clay chips!
Matt |
02-17-2007, 10:14 AM
| | ChipTalk.net Sponsor! | | Join Date: Jul 2005 Location: Gothenburg, Sweden Age: 32
Posts: 1,891
Chips: 1,577
| | | Re: Best way to un-warp Paulson chips !!!
Quote: |
Originally Posted by Matt there might be other things you can use in between the clay chips. But whatever you use needs to be round, 39mm in diameter, perfectly flat, uncolored and be able to withstand the heat. Perhaps there are other poker chips on the market that would work too, but I have to advice people to be very careful when testing other things to use in between. You don't want to ruin your expensive clay chips! |
These might work instead of ceramic blanks and only cost 5 cents each, but please try with only a few Paulson chips at first in case the Faux Clay's color will transfer onto the Paulson chips. Be careful so you don't ruin your Paulson chips! 
Matt |
02-17-2007, 10:22 AM
| | Short Stack | | Join Date: Mar 2006 Location: Sundsvall, Sweden Age: 49
Posts: 44
Chips: 38
| | | Re: Best way to un-warp Paulson chips !!!
Quote: |
Originally Posted by Matt These might work instead of ceramic blanks and only cost 5 cents each, but please try with only a few Paulson chips at first in case the Faux Clay's color will transfer onto the Paulson chips. Be careful so you don't ruin your Paulson chips!
Matt | LOL! Ooh Matt, now you've done it! The FCN-people are going to give it to you now........!  
All the best, JIB
Edit: Eh.. just wanna make one thing clear, I'm NOT a FCN member. As far as I Know, they are non-existent in Europe.
Last edited by JackInBox : 02-17-2007 at 01:07 PM.
|
02-17-2007, 10:28 AM
|  | TAG extrodinare | | Join Date: Jul 2006 Location: winning a tourney @ Wynn Las Vegas Age: 36
Posts: 3,901
Chips: 20,911
| | | Re: Best way to un-warp Paulson chips !!!
Ummm I'm not sure you want to do that to the FC's. Not only am I not confidant the chip will handle the heat or not transfer the color - it will definitely bring the wrath of the FCN down hard!!!!!! 
VIVA Faux Clay!!!! www.fuaxclaynation.com Quote: |
Originally Posted by Matt These might work instead of ceramic blanks and only cost 5 cents each, but please try with only a few Paulson chips at first in case the Faux Clay's color will transfer onto the Paulson chips. Be careful so you don't ruin your Paulson chips!
Matt | |
02-17-2007, 11:08 AM
|  | | | Join Date: Aug 2005 Location: Columbus, Ohio
Posts: 3,763
Chips: 4,648
| | | Re: Best way to un-warp Paulson chips !!!
Quote: |
Originally Posted by Matt These might work instead of ceramic blanks and only cost 5 cents each, but please try with only a few Paulson chips at first in case the Faux Clay's color will transfer onto the Paulson chips. Be careful so you don't ruin your Paulson chips!
Matt | Just because your across the ocean does not mean we can't reach you.
The FCN is everywhere.
We make the Taliban look like punks. |
02-17-2007, 05:11 PM
| | ChipTalk.net Sponsor! | | Join Date: Jul 2005 Location: Gothenburg, Sweden Age: 32
Posts: 1,891
Chips: 1,577
| | | Re: Best way to un-warp Paulson chips !!!
*lol* 
I never said anything negative about the faux clays! In fact, they might be the only chips that are good enough to be used instead of ceramic blanks. In my recollection, faux clays are flat unlike most other injection molded plastic home market chips. What I would worry about though is a possible color transfer. I believe that both printed ceramics and Paulson chips will transfer color at 170 degrees Farenheit + pressure so there's no shame on the faux clays if they do to.
Matt |
02-17-2007, 05:43 PM
|  | Final Table | | Join Date: Feb 2006 Location: Western Nebraska
Posts: 613
Chips: 43
| | | Re: Best way to un-warp Paulson chips !!!
You might end up with dice impressions on your Paulsons!
Paulson dice chips!!! |
02-17-2007, 05:58 PM
| | ChipTalk.net Sponsor! | | Join Date: Jul 2005 Location: Gothenburg, Sweden Age: 32
Posts: 1,891
Chips: 1,577
| | | Re: Best way to un-warp Paulson chips !!!
Quote: |
Originally Posted by cowboys You might end up with dice impressions on your Paulsons!
Paulson dice chips!!! |
I doubt that Paulson chips are THAT soft
Matt |
| Thread Tools | Search this Thread | | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
Chips Per Thread View: 0 Chips Per Thread: 6 Chips Per Reply: 1 | | |
| |
