[palmimports]

Developed by Palm Imports in 2007, and manufactured by our affiliate, Sunfly, the new ceramic hybrid chip allows a unique combination for those wishing a ceramic chip but with a permanent inlay.

By utilizing a ONE INCH center- we've left customization up to the individual. The one inch center inlay area was done deliberately to allow those with laser printers and inkjet printers to be able to customoze their own chip- while maintaining the quality of our Equinox series ceramic blank.

The hybrid can be ordered in many combinations:
1- fully custom printed- edge AND face border NO inlay- make your own
2- fully custom printed INCLUDING our unique poly inlay
3-blank edge and/or blank face
4- SOFT CENTER direct print. The entire face can be custom printed, and the recessed inlay area exhibits what we call a SOFT PRINT center- slightly diffused- a truly unique look.

Aligned edgespots can be made with NO inlay- allowing you to design a FULLY aligned inlay chip.

Beginning in January you will be able to order a FULL custom printed hybrid- standard non aligned edgestripe, printed face border AND our hi quality inlay for .49 ea.

Chiptalk members enjoy our NO MINIMUM order requirements- and we will print as few as ONE chip for you ( under 100 chip orders are required to use preprinted edgestripes)

Laser engraving is also available beginning in January for this product

[beyondtilt]

bravo!!!!!!!!!
there goes january's commission check

[alabubba]

When can I order samples?

[palmimports]

Originally Posted by alabubba

When can I order samples?

Originally we wanted to print these for samples- but then we thought that we could would just send out blank samples with our sample pack- so thats what were doing. In our complete sample package are the new hybrids- we will probably include printed inlays on the hybrid samples starting next week.
Joe

[Stevo]

"Beginning in January you will be able to order a FULL custom printed hybrid- standard non aligned edgestripe, printed face border AND our hi quality inlay for .49 ea."


Joe,

Sorry to be so confused. In your other thread, you said these will be available until January 1, 2008 for $.49 - full custom. Here, you say they will be that price after January 1, 2008.

I've got 3 days and the difference is - will my wife kill me or not. If I have to place my order within the next 3 days, my wife will kill me. I can live with that.

How long will the $.49 be good for? Thanks.

[MistaSantos]

Will you offer stock edge stripe chips that we can have a custom label applied for less than .49 cents?

[palmimports]

Originally Posted by MistaSantos

Will you offer stock edge stripe chips that we can have a custom label applied for less than .49 cents?

yes you can order faces/edges only for .35c

[Double Eagle]

Joe:

How will the inlays on your hybrids compare to the inlays on compression molded clays? I tend to shy away from chips that have inlays that look like stickers.

I ordered your sample assortment and hope there will be a hybrid with an inlay to examine.

[JM]

Originally Posted by Double Eagle

Joe:

How will the inlays on your hybrids compare to the inlays on compression molded clays? I tend to shy away from chips that have inlays that look like stickers.

I ordered your sample assortment and hope there will be a hybrid with an inlay to examine.

I don't think you can compare them to clay, since the inlays there are molded into the chip when pressed. I imagine these are more like Bud Jones or Matsui chips. Probably closer to BJ though. Correct me it that's wrong Joe.

[SDRamones]

Pictures of Stripes/edges please.