Poker Plaque Storage

oldwestgambler · Tweet this Post! #1 08-05-2011, 04:42 AM

Okay, so we were finally able to find some cases that work or may work for plaques. Of course since we sell 5 different sizes of plaques it's hard to manufacture cases that would fit all 5 sizes.

Instead you kind of have to use your imagination and utilize some foam to hold your precious plaques in place in their cases. The two larger cases are lined with a lot of foam.

Here are the cases...

The first case is nice and small and it's actually made for the cheaper plastic dice plaques we offer but I found that they work for the higher end ceramic plaques as well. Surprisingly it will fit a nice size collection especially if you use smaller plaques. They aren't ideal for the larger plaques but they do fit. This case's dimensions are 9.5" x 4" x 2.5" (or 24.13cm x 10.16cm x 6.35cm)

The case can hold:

60 Plastic Dice Poker Plaques OR
56 x 85mm Ceramic Standard Plaques OR
45 x Small 68mm Ceramic Plaques OR
35 x Medium 82mm Ceramic Plaques OR
20 x Large 94mm Ceramic Plaques OR
20 x Extra-Large 107mm Ceramic Plaques OR
A variety of 6 each of the 68mm, 82mm, 94mm and 107mm plaques

Small pieces of foam or padding will help to keep plaques from moving around. Estimates above were reached by laying the plaques flat within the case (except for the Dice Plaques)and are only estimates. Your results may vary.

The second case is built specifically for a set of 300 poker chips, one deck of cards and a dealer button but you can obviously see that all you have to do is pull the racks out, maybe cut the foam if necessary or add some foam separators of your own. I haven't tested this case so I'm not sure how many plaques it will hold. Stay tuned and I will try to test one for you all. I don't have the dimensions for this case.
The three racks are included

The third case is from the same manufacturer and is built to hold 500 chips, two decks of cards and a dealer button which are not included. It just takes a little imagination and you've got a great plaque case. I haven't tested this one either but I plan on it soon.
Five racks are included.

If you want to order or if you have more questions just drop me a private message or send an email to oldwestps AT gmail DOT com (email is better).

I'll try and do the reviews of the two larger cases soon.

Casablanca · Tweet this Post! #2 08-05-2011, 10:59 AM

Nice looking cases.

courage · Tweet this Post! #3 08-05-2011, 11:04 AM

Very nice, Sal. Interested if any of the cases will allow vertical storage of your two largest plaques and still close.

Any pricing yet?

picklz · Tweet this Post! #4 03-02-2012, 05:15 PM

Do you have any pictures of the various sized plaques in these cases? Curious as to how they fit. Also as was asked a while back any chance of the largest of plaques standing vertical? More interested in the first case unless you've done some testing on the second one.