Matsui Decal WSOP - ALL MOLDS CAN BE USED, DISREGUARD

fcuk · #1 (**permalink**) 07-19-2005, 10:40 AM

.
We can use all 7 molds for no additional charge. This poll is now just here for fun.

montyburnz · #2 (**permalink**) 07-19-2005, 10:51 AM

How many molds are we going to have total? Just one or the top X amount. There's 3 of them I really like.

Lumpy · #3 (**permalink**) 07-19-2005, 12:35 PM

If you only go with one mold you will not be able to tell the 1000 apart from the 10000 when stacked.

ThorCavalier · #4 (**permalink**) 07-19-2005, 12:45 PM

Quote:

Originally Posted by Lumpy

If you only go with one mold you will not be able to tell the 1000 apart from the 10000 when stacked.

Depending on which mold is used, this might not be as big of an issue. For instance if you go with the mold on the 10k or 50k chips pictured here, then the final result will be a yellow chip with black bars, vs. a black chip with yellow bars. If you go with a mold that only has spots, without the little inset bars or dots, then you won't be able to tell them apart at all. I'm not sure if that was clear, but hopefully everyone can follow me.

JM · #5 (**permalink**) 07-19-2005, 12:45 PM

That's easy, just change the base color of one of them.

If you want to see what these molds will look like with different colors, do the following. Right click on the picture and select copy. Then open Paint from Start - Accessories and select Edit - Paste. That will put a copy of this picture in Paint. Now press Control - i (as in Invert Colors) and you'll see all of them with a completely different color scheme! The 1000 chip should end up as white on blue when inverted.

ThorCavalier · #6 (**permalink**) 07-19-2005, 12:48 PM

Interestingly, the mold that is currently winning will create the most problems of recognition between 1k and 10k chip.

I personally would vote for doing more than one mold, but not so many that the price gets outrageous. I think maybe 3 molds would be good if the price stays under $.90 per chip.

BrassGuru · #7 (**permalink**) 07-19-2005, 02:28 PM

I'd be willing to pay any price to have all of the molds. I think these look really unique and it would be a shame for them to all have the same mold.

Wooderson · #8 (**permalink**) 07-19-2005, 02:51 PM

Ahhh.. I thought you planned on using a different base mold for each one... Well hell.

fcuk · #9 (**permalink**) 07-19-2005, 04:26 PM

It looks like it will be the same price for 7 molds as for one. So this poll is pretty much worthless. Is good to know which mold everybody prefers I guess

JM · #10 (**permalink**) 07-19-2005, 04:40 PM

How about a new poll to get rid of the $25 and replace it with a $25K chip?