[Silverwind]

I have done a few searches but have not found many. Any CT'ers out there with an ASM mold with 1" inlay? Like an A-mold or hourglass mold.

In general is there any difference in quality between the 7/8" & 1" inlays? (other than larger image)

If you have a 1" example please post pics or a link to pics. Thanks!

[Laxbum4]

These are 1 inch inlays. Don't have the 7/8" to compare to, but no quality issues with these.

[daffyd]

The Black Sands Group Buy chips had a 1" inlay and worked out beautiful.

http://www.chiptalk.net/forum/group-...gb-photos.html

Note that the hourglass mold has a 1 1/16" recess - IIRC it was recommended we only use 1" if we wanted a black inlay.

Regards,

David.

[Lucky Bee]

ASM can do a 1“ inlay on the A-mold or the Hourglass.
I have got two A-mold chips with a printed 1” center. Three of the inlays are positioned in the centre, but one inlay is a bit off-centered.

Here is the pic

[ontheuptick]

CALLING ALBINO!

Albino Dragon has a custom set with 1" and another with 7/8". I have sample sets of both of them, and side by side there is a HUGE difference in size between the two. He might have a picture with them side by side. I may try to get a picture of his chips, but I can't promise anything

[viet rounder]

No Mold

[jdunford]

I have Roman mold samples with 1" inlays, and Fleur-de-Lis (FDL) samples with 1-1/16" inlays. By the way, the FDL inlays are smooth, while the Romans are textured like the rest of the chip.

[BigKyle]

Here is a good illustration of the difference between the 7/8" inlays and 1" inlays on the hourglass mold.

[EmptyPocs]

on HG it's 1" max for black inlay, but I think you can do 1-1/16 on a white inlay.



http://www.chiptalk.net/forum/custom...hourglass.html

[brycej]

Originally Posted by EmptyPocs

on HG it's 1" max for black inlay, but I think you can do 1-1/16 on a white inlay.

Do you know the reason for the size difference between black and white inlays?