[ShadyJoe]

I definitely agree with Lucky Louie about inverting the colors, and also agree that the font is too small. It is a nice inlay with nice color selection.

[hico]

[Dimes]

If you want all black chips I think you should use lighter spot colours or they will be too hard to tell apart.

Imperial blue, pink, light green, grey, lavender, white and the dayglo colours would probably be fine. Perhaps also mandarin red.

Use spot combinations with a lot of spot area to make as much non-black as possible: 312, 3D14, 412, 4A12, 4D14, 614, 6A14.

Your denominations are very small.

TT

[Strange]

The 16g Tangiers all have the same base colour

tangiers

So people do use/buy these things.

I agree with everyone else on the too little colour on the blue chip point.

You'd be better off with the same big spot type, I think. maybe 412, and just change the colours. make sure you pick bright ones.

Make the denoms much bigger.

[Devilboy]

Don't listen to anyone, I think these will look hot. I have some Tangiers Brass chips and they have even less colour on them, and they work just fine.

Just change the $1 chip to 414 and you're set.

[RTBrandy]

Originally Posted by jldecarlo

I think all the denoms are too small. I am not sure if you will easily be able to tell the chips apart. I think you will, and, if so, you will have a unique and interesting set.

L

I agree with this....the numbers are too small....

cool design, though.

[Gaflax]

I thinks its a very bold looking set, color and insert design. It gave me some ideas about my custom set. two things though - denominations too small, 1 and 5 edge spots need to be wider to avoid confusion. But a very cool looking set.

[Poboy]

I don't have a problem with the all black set, but I think you need to use 1/2 spots (or the D1/4). The single 1/4 spots just don't add much color if you are using all the same color body.

[noelsarchs]

Originally Posted by hico

Like everyone else i'm trying to come up with a design for an ASM set. Any /all comments, suggestions welcome. The inlay is a mirror image of my initials, but my question is "would you have a problem playing with this set"? ---- Using one color for the base color of all chips ----- The spots progress and are large but they are the only color designation for denominations. Do you think this will be too confusing?




Traditional colors and progresive spots. The "5" on the red chip needs to be larger and the "25" on the green needs to be smaller. Any thing else look like a problem? Brown for the $100 chip? The width of the "LE" on the green and the gold chip looks thinner than the others, but it must be the color combinations because it's not. thanks for the help.

I designed an all black set last week for fun and posted it here somewhere....I think a little more edge spot contrast would also be good as some have suggested...pretty cool all black in my opinion.

[viet rounder]

OK lets get this straight! the Tangiers do not have the same base color, they have the same edge spot color which is the brass.

I have not heard about anyone playing with a full set of tangiers but i can imagine that the black and lavender chips might be hard to differentiate in a low light environment.

If you are going to go the All-Black Body route, i highly suggest using "12 spots". If you go for the "1/4" then use the 614 pattern. From experience, i would recommend ditching the white ring as well