ASM custom Mock-up. Opinions Please! - UPDATED IMAGES

JediHog · #1 (**permalink**) 12-15-2005, 01:53 PM

NEW INLAY:

----------------
OLD INLAY:

What do you think? I'm going with 7/8" Ripped Sheets for the label.

Thoughts? Critical observations? Let me have it....

Thx.

JediHog · #2 (**permalink**) 12-15-2005, 01:55 PM

NEW INLAY:

--------------------------
OLD INLAY :

Tayman20 · #3 (**permalink**) 12-15-2005, 02:04 PM

Simple design but I like it a lot.

JM · #4 (**permalink**) 12-15-2005, 02:54 PM

Nice, but you gotta leave that 1/16" area around the edge of the inlay. Remember only 3/4" of the 7/8" inlay is printable.

JediHog · #5 (**permalink**) 12-15-2005, 03:12 PM

Even on the Ripped Sheets? I figured you could have full bleed as the sheets of labels allowed for this. I'm not getting inlays, just labels (stickers).

Correct me if I'm wrong.

Quote:

Originally Posted by JM

Nice, but you gotta leave that 1/16" area around the edge of the inlay. Remember only 3/4" of the 7/8" inlay is printable.

JM · #6 (**permalink**) 12-15-2005, 03:20 PM

Oh ok, nevermind then! I missed that part of the post.

babujit1 · #7 (**permalink**) 12-15-2005, 03:25 PM

did you print it out to see if the font would be to small or not?
I like the design though.
They will look good.

JediHog · #8 (**permalink**) 12-15-2005, 03:31 PM

Good thought on printing it out first. I'll do that tonite.

Kalimba · #9 (**permalink**) 12-15-2005, 03:52 PM

The label in your mockup is too large to be 7/8" diameter. It appears to be at least 1".

JediHog · #10 (**permalink**) 12-15-2005, 08:43 PM

Yeah, I just threw together a quick mockup to see how they'd look. I've not yet made it to scale.

Quote:

Originally Posted by Kalimba

The label in your mockup is too large to be 7/8" diameter. It appears to be at least 1".