[spyder2k4]

this is my current chipset and would like some help designing some extra chips which i am going to expand my set with


If possible i would like a purple chip to the value of $500
A Yellow chip value $1000
And i would like to revalue the blue chip as it is pointless and make it a $5000 chip. I realise these aren't great chips but living in australia limits my options as far as chips go.
Any help would be appreciated

Also is it possible for people to recreate labels from just these pictures
Eg. i was planning to get enough labels for another 200 of my gray $1 chips and was hoping the printer would be able to make a label from just this image

[BlakeC27]

The joys of living down under, I'm New Zealand based and feel your pain regarding limited options.

Were the inlays customs or did they come with the chips? You could crop the inlays off the picture but the quality wouldn't be too crash hot in terms of printing the lables off directly off the picture.

Your best bet might be to replicate the designs and maybe even improve them a little.

Just my 2c.

[spyder2k4]

Originally Posted by BlakeC27

The joys of living down under, I'm New Zealand based and feel your pain regarding limited options.

Were the inlays customs or did they come with the chips? You could crop the inlays off the picture but the quality wouldn't be too crash hot in terms of printing the lables off directly off the picture.

Your best bet might be to replicate the designs and maybe even improve them a little.

Just my 2c.

The inlays came with the chips when i bought them. straight off ebay
Maybe it may be worth me sending a sample of each of my current chips to the printer and c if they can do anything about it.
Also about me improving them. my skills with anything artistic lacks a lot. And i would rather not change the design as i want them to match with the current lot i ahve. i basically just want more of the same chip and a new $500, $1000 and $5000 chip

[PAFisher]

if you want an exact match, you might try and contact the ebay seller directly to see if you can buy just the labels that you need.

I don't think you are going to be able to make labels from that scan as the images are already grainy and would just be amplified when they were printed.

Blake is right about trying to reproduce them. Remember if you are adding colors/denominations that you don't already have, you might be able to reproduce something that would be similar enough to pass as part of the original setup.

PAFisher

[BlakeC27]

Yes, trying contacting the selling regarding the additional denoms. Even a very good reproduction still might seem out of place to the orginials.