[H4tfan]

Hello Chiptalk Members,

Several months ago, I researched a process of labeling our poker chips with a laser. I posted a few articles with photos to convey what I was doing and how well it worked. Several Chiptalk members joined in with questions, chips, ideas, and overall support for the process. Near the end of 2006, I made the decision to offer the custom laser service to Chiptalk members. Currently, I am scratch building a machine that is nearing completion. If things go well, I should be ready to test fire the laser on Sunday or Monday. There’s much more to do before it will be production ready, but I'm almost there. Until then, I’ll edit this post and add information as things progress.

Thanks,
Jason
LazerChips

News: June 4, 2007 - Big day today. I fired up the laser and marked the first chip. This day is one that I will never forget.
News: June 15, 2007 - Things are moving along. I plan to be ready by July 4th. I have paint pens, chip stickers, a supply of chips and I will offer a set of stock artworks to assist in the design process.
News: June 27, 2007 - I'm pushing back my ready date of July 4th. I am ready to create chip samples and assist with your artwork ideas.

A historical view of LazerChips:

A look at labeling chips with lasers: http://www.chiptalk.net/forum/poker-...ps-lasers.html
Labeling with lasers II: http://www.chiptalk.net/forum/poker-...lasers-ii.html
Labeling with lasers III: http://www.chiptalk.net/forum/poker-...asers-iii.html
Labeling with lasers IV: http://www.chiptalk.net/forum/poker-...lasers-iv.html

Question & Answer

Q: How much does the service cost?
A: (10¢ for 1 side or 15¢ for 2 sides) +all shipping costs. There will not be a setup or artwork fee for Chiptalk members.

Q: Will the images be stock or customizable?
A: Both. I will offer a stock set of images as I create them or I can use your personal design. No copyrighted images or logos, please.

Q: Is this service for plastic, clay or ceramic?
A: All of the above.

LazerChips.com