| Re: Problems Labeling Faux Clay
This sounds a little bit like the toner not having bonded to the paper correctly, though as toner is just plastic, it can be scraped off of the printed surface as well. If Jason is using an Okidata 5150 as was reported elsewhere, this could happen with the black toner if it is printed using the paper setting rather than the Transparency or Label listing when it was printed. If Jason is going to reprint those, I'd suggest just waiting for the reprinted labels. The spraying should not have any impact on it that would cause the toner to separate from the printing surface, if anything it will give added protection to minimize scratches to the toner, however if the toner is not adequately bonded to the printing surface, it's going to flake whether it is sprayed or not. | 
